This "Glass tube hand cutter" is a hand cutter that can cut the glass tube with simple and accurate dimensions. Since the main body is made of stainless steel, it is also excellent in durability.
1) Very fast to set up
2) very fast to change cutting length
3) Very straight 90 degree score lines for perfect cracks every time
4) Cuts multiple pieces to exactly the same length every time very fast, very accurate.
5) Easy to get a perfect crack off every time with a soft fire on the outside
how to use
Secure the plate to which the glass tube hits the length to be cut with screws.
Place the glass tube from the tip and hit the Teflon ring. Grasp the lever on the main unit and turn the glass tube. A cemented carbide (tungsten carbide wheel) is fixed to the tip of the rod, and turning the glass tube rotates the wheel and Very straight 90 degree score lines inside the glass tube.
A glass tube with a notch can be cut with light burning with a gas burner's annealing flame.
Chips are inferior in sharpness when they touch the same position many times. When contacting the glass tube please make it a full lap. Depending on the number of uses, it can be used for 2 to 3 months.
Wheel exchange is easy.Replace the tip by loosening the screw at the tip and displacing the pin fixing lid. Pull out the internal pin to disengage the wheel. Put the wheel to be replaced in the groove, insert the wheel fixing pin into the hole of the wheel, and fix the pin fixing lid with screws.
Model: TS-1 type
Material: stainless steel, iron, silicon rubber (grip part), Teflon
Size: 325 mm × 160 mm × 50 mm
Weight: about 490 g
Usage range: inner diameter 9 Φ ~ inner diameter 50 Φ, length about 120 mm
Main included items: main body, tungsten carbide wheel × 3, pin for wheel fixing × 3, wrench × 1 instruction manual
Optional item: Tungsten carbide wheel 1 piece @ US$10.00
wheel fixing pin, 1 piece @ US$5.00
Shipping fee from Japan to USA: About US $ 40.00
Delivery period: about 1 week
Please contact us by mail, shipping fee and payment method.
Payment is Paypal
Glass tube table cutter
This "glass tube table cutter" is a table cutter that can cut the glass tube with simple and accurate dimensions.
1) The glass tube setup is very fast
2) Very fast to change cutting length
3) Very straight 90 degree score line generates perfect crack every time
4) When cutting very fast, very accurate, cut multiple pieces exactly the same length.
5) Easy to get a perfect crack every time with a soft fire on the outside
How to use
Adjust the position of the roller so that it can rotate accurately.
Please mark the position where the glass tube is cut.
Please put the stainless rod with the cutting wheel in the marking position into the glass tube. Secure the stainless steel rod with screws.
Lift the opposite direction of the stainless steel rod, press the cutting wheel against the inside of the glass tube, and rotate the glass tube.
On the inside of the glass tube you can make a very straight ninety degree indentation.
The notched glass tube can be burned lightly and cut with the gas burner's annealing frame.
There are two types of stainless steel rods, short cut and long cut.
In addition, we have an arm that can make notches on the outer circumference of the glass tube.
If you touch the same position many times, the sharpness of the chip will be inferior. When contacting the glass tube, please make it a complete circle. Depending on the number of uses, you can use for 1-2 months.
Wheel exchange is easy. Loosen the screw at the tip, shift the pin fixing lid and change the tip. Pull out the inner pin and remove the wheel. Insert the wheel to be replaced in the groove, insert the wheel fixing pin into the hole of the wheel, and fix the pin fixing cover with the screw.
Model: TS-T1 type (made in Japan)
Material: stainless steel, aluminum, Teflon
Size: 1260 mm × 400 mm × 350 mm
Weight: Approx 8 kg
Usage range: inner diameter 15 Φ ~ inner diameter 300 Φ, longest cut length about 500 mm
Main included items: main body, tungsten carbide wheel × 3, pin for wheel fixing × 3, spanner × 1, right angle ruler, hexagon wrench, instruction manual (assembly type)
Price: $ 3000.00 (consumption tax, by shipping fee)
Option: Tungsten Carbide Wheel 1 piece @ $ 10.00 Wheel fixing pin, 1 piece @ $ 5.00 (consumption tax, shipping fee basis) Make-to-order product
Payment is Paypal